Why Choose a Wireless IP Camera Supplier?
Unlike analog cameras, IP Cameras are open systems that can be easily customized. This makes them more versatile than an analog system, but it also means that the initial setup can be more expensive.
An IP Camera can be connected to a wired network using an Ethernet cable, to a Wi-Fi wireless connection or cellular network. Some can work with a central network video recorder (NVR), while others can be standalone.
What is a wireless IP camera?
Wireless IP cameras are a popular security and surveillance option. They offer a variety of advantages, including easy installation and remote access. Additionally, many models come equipped with motion detection technology and high-definition video. These features make them a great choice for both home and business surveillance needs.
Compared to wired CCTV systems, wireless IP cameras are often more cost-effective. Their wireless connection eliminates the need for expensive cables, which reduces both upfront and maintenance costs. In addition, they can be easily installed in areas where it would be impractical or impossible to run cables.
In addition to the ease of installation, many wireless IP cameras are also more secure than their wired counterparts. They use end-to-end encryption to protect sensitive data and are less likely to be hacked than traditional analog cameras.
A wired network camera, on the other hand, is more difficult to install because of the need for electrical wiring. However, it has several advantages over its wireless counterpart, including faster transmission speed and greater reliability.
Some IP cameras have PoE capability, which allows them to receive both electrical power and data over the same Ethernet cable. This means that they can be powered using standard Cat 5 or 6 Ethernet cables, which reduces the number of hardware components required and makes them easier to maintain.
Power over Ethernet (PoE)
Power over Ethernet (PoE) is a technology that uses network cables to carry electric power for devices like IP phones, wireless access points, and security cameras. This eliminates the need for separate power cords and reduces the number of outlets needed for these devices.
To deliver power over Ethernet, you need a PoE-enabled switch or injector device that sends a special signal Dual Lens Camera to the Ethernet cable’s differential pairs of wires. The twisted wires are used to carry both data signals and power. Then, powered devices (PDs) receive the low-voltage DC power that’s transmitted over the same RJ45 network cable that provides a data connection.
PDs can range from traditional Ethernet devices to a wide variety of AV equipment. These include things such as a cloud phone system, an IP camera, or even lighting systems. Using PoE, these devices can be easily connected to a network and provide the services your business needs without extra cost or installation.
Compared to traditional AC wiring, installing PoE is much faster and simpler, and it can save you money on electrical power costs. You also avoid the expense of buying and maintaining additional power outlets, which can add up quickly. Plus, because the power is transmitted over a network cable, you can schedule when devices are powered on and off, further cutting energy costs.
Antennas and radios
For locations where it is either not possible or cost-prohibitive to run a network cable from the camera to your router, wireless ip camera supplier IP cameras can be connected to a wireless transmitter and receiver. This allows the video signal to be transmitted over a wireless connection, usually using Wi-Fi radios, but can also use 3G or 4G for telephone network connectivity.
Some of our WiFi IP cameras have a built-in radio that can be connected to an existing basic home or business WiFi network, making installation even easier. Others can be used with separate wireless antennas for long range capability, especially when directional antennas are used. In open air, our IP cameras have a WiFi range of up to 300 meters; indoors with walls or obstacles they will typically cover 4-5 rooms.
We carry a large selection of bullet, dome, fish-eye and PTZ IP cameras. Whether you need a fully wired or wireless CCTV system, we can help you find the perfect solution for your application.
All our IP cameras are Onvif compliant, meaning that they can be easily integrated with any third-party Network Video Recorder (NVR) or security software. This makes the transition from analog to IP technology smooth and seamless. It also means that the same hardware can be used for both wired and wireless CCTV systems, which helps reduce costs and complexity.
Installation
Unlike CCTV cameras that must be connected to a central network video recorder (NVR) for recording, display and alarm management, wireless IP cameras integrate into a local wired or WiFi computer network. This means that they can be monitored from a smartphone, tablet or desktop computer without the need for expensive and time-consuming installation.
To begin using a wireless IP camera, plug it into your home or business’s Wi-Fi router and connect to the same network as other devices such as computers, smartphones and some TVs. Then open a Web browser and enter the device’s unique IP address to view its live feed. Most wireless security cameras have this information printed on the device or written in their operator’s manual.
Most newer IP cameras include built-in WiFi connectivity, eliminating the need for a separate networking cable. Simply follow the manufacturer’s instructions to connect the camera to your WiFi network and follow other prompts to set up your security monitoring system. Some cameras also support voice commands through virtual assistants such as Amazon Alexa or Google Assistant.
Depending on the type of camera you have, it may require a PoE switch or other networking equipment to transmit data and power over a single Ethernet cable. If you choose a network switch with PoE capability, install the switch near your IP camera installation point and make sure that it has enough ports for all of your cameras.