Waterproof Wire Splice Connectors
Splice connector terminals provide an insulated point of connection for conductors secured by crimping, soldering, friction, screw or IDC. They can be used on either solid or stranded wires.
There are several ways to splice a wire, but tap splice connectors offer the most reliable option for electrical wiring applications. They can be used for lighting, extension and security system connections.
Wire Splice Connectors
There are many electrical wire splice connectors on the market that allow you to join two or more electrical wires without any need for heat, soldering or other labor-intensive processes. These connectors are made from a material such as nylon which is sturdy, or vinyl, and are coated with an adhesive that keeps moisture, wire splice connector waterproof dust and other contaminants from entering the connection. They can also handle high voltages and are ideal for outdoor applications or harsh industrial environments.
The main advantage of splice connectors is that they are safer to use than traditional soldering and provide better conductivity. They are also easier to install than other solutions, such as insulating tape, heat shrink and corrosion kits. They are available in a variety of sizes to accommodate all types of wires. Some of these splice connectors are even UL listed and suitable for electrical installation.
The most common type of splice connector is the butt splice connector. This type of splice connector is tube-shaped and has two crimps on each end. To use it, you simply insert the ends of the wires into each crimp and then crimp them using a hand tool. A conductive ring within the connector then carries current between both wires. The crimp also creates a durable seal that prevents the wires from corroding in harsh environments or during frequent use.
Tap Connectors
If you’re looking for an easy way to add a new wire to your existing wiring without the mess and risk of soldering, tap connectors are an excellent solution. These vinyl plastic termination devices have a sharp metal insert that safely cuts through the plastic insulating jackets of two or more pieces of wire within a recommended range for the splice. Then, they crimp them together and close up to create a permanent electrical connection.
These waterproof outdoor wire connectors are ideal for use on your boat or to add wiring extensions to your Swamp Eye submersible lights. They are also great for saltwater applications and will not corrode or oxidize over time like other traditional copper connections. Plus, they’re much easier to work with than traditional wire splices because you don’t need to solder or crimp in confined spaces.
To use them, just feed the end of a new wire into the opening in the tap connector. Then, press down on the metal portion of the device to slice into both pieces of wire and make a connection with them. Once the connection is complete, the plastic casing folds over the ends of the wires and crimps them to seal the splice. These splices are incredibly durable and will withstand moisture and sunlight. Always remember to turn off power at the circuit box before installing or removing them, and follow all local electrical codes.
Butt Splice Connectors
A butt splice connector is a cylindrical crimp connector that has one crimp on each end and eliminates the need for tape or soldering. It is easy to use and a lot safer than using a soldering gun which requires much more heat, which can cause injuries. It is also much cheaper and quicker than buying and using soldering equipment.
These electrical connections are often found in industrial equipment, automotive, marine, power management, solar, data transmission and more. They are simple to install and are built for longevity. They can be used in various applications to splice multiple wires together or make an extension. They can even be used to correct a wiring mistake or repair damaged wires.
When choosing butt splice connectors, ensure they have the proper size and gauge to meet your requirements. These are marked with different color codes based on the wire gauge, such as yellow for 10-12 AWG, blue for 14-16 AWG and red for 18-22 AWG. You can also find non-insulated butt splice connectors and heat shrink butt splice connectors.
Before crimping a butt splice connector, ensure you shut off the power at the source and that there is no electrical charge on the wires. Then strip the ends of the wires and slide them into the butt splice connector. You can test the connection by gently tugging the two wires. If they pull apart easily, the splice connector has not been properly crimped and could cause an unsafe electrical connection.
Heat Shrink
A heat shrink connector is a form of tubing that can be wrapped around cabling during repair and splicing. It creates a strong, watertight seal that is resistant to moisture and waterproof connector manufacturer fungal contamination. It can also be used to insulate connections, bind loose wires and create an effective strain relief solution. Heat shrink connectors are available in a variety of sizes and colors to match your project requirements. They are made from versatile materials like polyolefin and may feature a dual-wall design with an outer layer that will shrink and melt to the inner tube when heat is applied. Other popular options include PVDF and Kynar, which have impressive durability against harsh chemicals and fuels.
While electrical tape is a useful tool for many situations, heat shrink tubing offers several advantages over it. It can be purchased in a wide range of diameters to suit different applications, and some types are even waterproof if you choose adhesive lined tubing.
Heat shrink tubing is a type of plastic that expands when heated, creating an insulation for electrical wiring and cables. It is an important protective and organizational product in various electrical arrays because it protects against environmental harm, such as liquid or solid contaminants that can cause shorts or other damage. It can also bind and organize splices, connections, terminals and joints.