PoE CCTV Camera Kit
If you’re looking for a security camera system that’s easy to install and scale, consider a PoE system with an NVR and PoE IP cameras. Most of these systems use one cable for both power and network access, so you’re not limited to locations near an electrical outlet.
This reduces installation complexity and allows you to place cameras where they’re needed most. Plus, you can upgrade existing LAN networks with PoE injectors to add compatibility for the entire system.
Power over Ethernet
Unlike traditional analog security cameras that require separate cables for power and network access, PoE systems use the same Ethernet cable to transmit both data and power. This significantly simplifies the installation process, reduces costs and minimizes potential disruption to your business operations.
Using PoE, you can run up to 100 meters (328 feet) of cable from your switch or injector to your IP camera without a significant loss in connection speed. This allows you to place your cameras closer to the area they are protecting, increasing coverage while decreasing the risk of theft or vandalism.
As with any technology, there is a small risk that the cabling used for PoE will fail over time. This is why it is important to ensure your system uses high-quality, poe cctv camera kit certified components that have been designed and tested for long-term reliability.
When it comes to installing your PoE CCTV system, you will need a router and a PoE switch or injector that can support your camera’s power requirements. Once installed, you will then connect your cameras to the PoE ports on your NVR using an Ethernet cable. You can then watch your footage online, or record locally onto the NVR. If you are looking for a complete CCTV solution that supports up to 8 cameras, the RLC-810A 4K UHD PoE security camera is a great option. This camera features advanced AI-powered person/vehicle detection, 4K video resolution and up to 130ft night vision.
Longer Cables
Using Ethernet cabling can help you get the most out of your camera system. Unlike WiFi connections, wired networks are stable and less likely to drop out (unless your internet service provider has an outage). Plus, ethernet cables are thin, so they’re easier to run through walls or ceilings. If you want to get even more out of your CCTV camera system, consider getting a PoE extender so you can power devices at longer distances.
In contrast, analog CCTV systems require separate cables for transmission of both power and video signals. This increases the wiring hassles and may also cause signal loss over long cable runs. Fortunately, many of the latest wired IP cameras can now be powered over Ethernet cable thanks to advances in technology. These are called PoE security cameras and can reduce your installation costs significantly.
The most popular Reolink PoE IP security cameras, for example, are plug-and-play and can be powered by a single Cat 5 or Cat 6 Ethernet network cable. You can even buy a PoE injector or switch that will let you power multiple devices at the same time. This makes it easy to keep an eye on your property, whether inside or out. Just be sure to bury any cables underground or protect them with PVC or metal conduit so they don’t interfere with other electrical wiring on your property.
More Storage Capacity
Most PoE security camera kits include a network video recorder (NVR) to store the footage from your cameras. The NVR will typically have an internal hard drive that can hold a certain amount of footage before it needs to be replaced. poe cctv camera kit As new footage is recorded, old files are overwritten to make room. Some NVR systems also feature a feature that allows you to draw polygons around areas of interest on the screen to prioritize motion detection and only save important video clips.
The NVR is where your footage is stored, and some come with a pre-installed hard drive to get you started. You can also add additional hard drives to the NVR system if you need to store more footage. The Reolink NVR in this kit has a storage capacity of 2TB, which is enough to store all of the footage from four cameras at 4K resolution for over a month.
You can connect the NVR to your internet router to access it from anywhere in the world, or you can use it as a local network and view your footage directly on your computer or TV. As a wired system, the NVR is less susceptible to slowed speeds and unreliable connectivity that can sometimes occur with Wi-Fi-based systems. You can even monitor the NVR without connecting it to the internet if you don’t need remote access.
Easy Installation
The main advantage of PoE CCTV cameras is that they require a single Ethernet cable to carry both data and power. As a result, they are simpler to install and can be run longer distances than traditional wired systems. This makes them ideal for outdoor use or large commercial properties, where many cameras may be located. The fact that they are wired to a network also makes them easier to manage, as the central system can be used to remotely reboot devices or adjust their power allocation.
With a PoE system, you can easily upgrade to higher resolutions without having to pay for new cabling or hiring an electrician. This scalability is also helpful for organizations that anticipate expanding their security infrastructure in the future.
Depending on the number of cameras you will be installing, it may be necessary to use a PoE hub. This device is able to supply several cameras with power and can handle up to 35 Watts per camera. It can be connected to your router using a standard Cat 5 / Cat 6 Ethernet cable and the output power from the hub is supplied to your cameras through a passive PoE splitter or PoE injector.
The NVR in this kit has 8 PoE network ports on the back, making it easy to connect your cameras and other equipment. The kit comes with a junction box that makes installation even easier by holding the cameras’ connectors avoiding external wiring.