How to Install a Plastic Grass Grid

Grass grids are the perfect alternative to conventional asphalt or block paving. They offer excellent stability and allow for natural drainage, with no pollution.

They’re more like thick plastic netting than true pavers. They are often used on slopes where erosion occurs or could occur, to prevent it from washing away.

High Strength

Unlike traditional pavers that are cement-based TRUEGRID is made from recycled plastic and can be installed on slopes and inclines with ease. The grid is also designed to prevent soil erosion, vehicle sinking and vastly improve drainage. It is perfect for driveways, overflow parking areas, roof gardens and more. Its unique interlocking design is chemically inert, non-toxic and rot free, which makes it ideal for greener and more sustainable applications.

The grass pavers are able to be filled with gravel or grass which will allow rainwater to permeate into the ground rather than being forced to drain via roads and causing flooding, surface water run off or polluting lakes and rivers. This will help to create a more natural environment and reduce the impact of urbanisation on our planet.

Often seen as a better alternative to concrete permeable paving, grass grids are also an excellent solution for reducing pollution in our lakes and rivers. By blocking the flow of pollutant chemicals into the underground water reserves the grids help to protect our waters and wildlife from toxic waste.

When choosing a grass grid you need to ensure that the product you are buying is of high quality. Low priced economy Plastic Grass Grid grade mesh will quickly deform under vehicular traffic and can rut out the grass underneath. This is caused by a lack of material strength and a flat surface that does not provide adequate traction for vehicles.

Environmentally Friendly

Unlike paving slabs or concrete, our plastic grass grids allow water to permeate into the ground so that it can be absorbed. This reduces the risk of flooding and excess groundwater. It also helps with drought conditions by allowing groundwater to be re-charged.

Grass grid can be filled with either gravel, soil or grass to create an ecologically friendly surface. It has been designed to help with drainage and can even meet SUDS regulations when filled with gravel. In addition to this, it can stop the evaporation of water from the ground surface, which can happen on many hard surfaces such as concrete or tarmac, thus helping to protect our environment.

The unique honeycomb structure of the grass grids is tough, durable and provides amazing stability for cars to drive on. The system is strong enough to support heavy vehicles and prevents soil erosion, providing a sustainable and green alternative to traditional permeable paving systems.

ECCOdal Lawn Grids are made from recycled material and feature expansion joints to deal with temperature changes, so they will not break. They are UV-stable, weatherproof and can be inserted in the ground with little maintenance required. This makes them the perfect solution for car parking areas, event sites and fire lanes to be greened and re-purposed into an eco friendly area.

Easy to Install

Plastic grass grids are a much easier alternative to asphalt or concrete surfaces, requiring only a small amount of equipment and less labor. The first step of the installation process involves preparing the ground by clearing any existing vegetation and making sure the area is level and free from large debris. Once this is done, a layer of rock, gravel or limestone should be added to create a strong base layer. This will help with drainage and prevent water logging.

Grass driveway grids are then installed over the top of this layer. Once they have been positioned, the male tabs of each grid are then lined up with the female slots of the next one to lock them into place. This can be repeated until the entire area is covered with connected grids. They can then be filled with soil, gravel or grass to create a surface that looks like a lawn.

Grass grids provide stability to a grass surface that is often prone to damage from vehicles, foot traffic or water logging. The grids protect the grass and soil from damage by preventing the surface from sinking or rutting, and they allow for water to move freely through the soil without causing compaction issues. Additionally, they can be easily removed and reinstalled in new areas when necessary, making them a perfect option for those who are looking for a cost-effective solution to solve specific problems.

Easy to Maintain

Grass Grid pavers look like a lawn and can be maintained with standard yard equipment. There aren’t any significant downsides to using them, though it may require a little extra time and money on your part.

ECCOdal grass grids create a permeable surface, so rainwater can easily permeate back into the ground. This prevents both a shortage of groundwater and flooding, while also reducing our ecological footprint.

Another great benefit of gravel grids is that they help stabilize a grass surface, preventing sinking and holes, provided a good foundation layer has been installed. Moreover, they provide a more uniform appearance, making your lawn or grass field look neater and more beautiful.

They can also be used to create a parking gabion factory area or driveway, although you should be aware that these surfaces are not as strong as concrete. In fact, a concrete surface will stand up to the weight of cars driving and parking on it better than a plastic one would. Depending on your needs, you may want to use concrete grass pavers for your driveway and a plastic one for the area off to the side of it that won’t be driven as frequently.

The most important thing to remember about installing grass grids is that you need to prepare the area before you start. This includes removing any large rocks and roots, and leveling the soil. Once you’ve done this, you can install your grids by lining up the female slots of the next grid over the male tabs of the previous ones, and locking them into place.