Waterproof Wire Splice Connector

The offers that appear on this page are from partnerships from which The Spruce receives compensation. This helps support our work and allows us to keep providing you with free content.

Splice connectors, also known as tap wire connectors, allow you to add a branch line to an existing circuit without cutting the main wire. They are insulated and have metal parts that conduct electricity to create a complete circuit.

Weather Resistant

Waterproof outdoor wire connectors provide protection from moisture, dust and insects. They also help keep your wiring free from corrosion. Whether you are working in the yard, at a construction site or on an ocean vessel, these waterproof connectors allow you to connect and disconnect wires without worrying about damaging your work.

These waterproof connectors are easy to wire splice connector waterproof use and have a low temperature solder and hot-melt adhesive. They are made from high-quality materials and can withstand up to 600 volts. They are also color-coded for easy identification and comply with all standards.

The pre-filled silicone sealant completely encapsulates the bare wires, providing a barrier against water and moisture. It also eliminates the need for additional tape, heat shrink or mastics. It is also ideal for underground pet fence splices and other wet or corrosion-prone applications.

These waterproof connectors are available for a wide range of voltage ratings and can be used on both stranded and solid wire. They also include a 15ml tube of dielectric grease to protect the connection from moisture and corrosion. The connectors are easy to install and can be done in a single step. They are perfect for irrigation valve splices, trailer repairs and landscape lighting. They are rated IP68 and are able to be submerged for up to 6 feet. They are also suitable for marine deep cycle battery terminals and Swamp Eye underwater drop bars.

Corrosion Resistant

The waterproof splice connector prevents the wire ends from corroding. It is pre-filled with silicone and encapsulates the bare wires, closing them against moisture and corrosion. It also has a double O-ring seal that bars water from creeping in. Its latches lock the connector around the wires. It can be used on direct burial applications, and is UL listed as a waterproof connection.

This waterproof splice connector is easy to use, and requires no soldering or mastics. Simply insert the stripped wires into the connector, then twist it on. The twist on feature saves time and eliminates the need to apply tape, heat shrink, or a corrosion kit. It can be used in damp or wet locations above ground, but is not designed for continuous submersion.

Ensure your wires are properly sized before installing this waterproof connector. This can help avoid over-tightening which may cause problems with your wiring later on. This is a great way to save money on expensive repairs or replacements.

This kit comes with everything you need to install a waterproof connection. It includes a cushion grip-lever terminal that protects your hands from blistering and numbness, as well as a dielectric silicone filled cable connector. The cable connector is a one step process, and can be installed on most stranded or solid copper wires. It is rated up to 600 volts and can be used for both underground or aboveground applications.

Easy to Install

The electrical connectors used in wet environments are vulnerable to corrosion and degradation if they are not protected. The most effective methods to protect these connections include using waterproof electrical tape, silicone sealant, and epoxy resin. Using these materials will ensure that your electrical connectors are able to work reliably in harsh, wet conditions.

Electrical connectors are a critical component in a variety of devices and systems, and it is important that they remain functional in harsh environmental conditions. In wet environments, including humidity, rain, and snow, moisture can cause electrical circuits to fail. Waterproof wire splice connectors are designed to eliminate the risk of corrosion and provide a secure, weather resistant connection.

There are several different options for waterproofing a wire connection, including grease-filled insulation displacement connectors, adhesive-lined heat shrink tubes, and solderable waterproof connector manufacturer waterproof connectors. Solderable waterproof connectors have an outer sleeve that is similar to heat shrink, and they are often transparent for inspection. Once the splice is complete, you simply apply heat to the outer sleeve, and it will become a permanent waterproof seal.

Using a waterproof wire splice connector is easy and fast. To install one, first strip the ends of the wires with a wire stripper and remove any outer insulation. Make sure that the exposed end of each wire is tinned. Place the tinned wires together, and then twist the waterproof connector onto them, pushing firmly until hand-tight.

Low Maintenance

The waterproof wire splice connector helps ensure that your wiring stays protected from the elements. This helps prevent electrical shorts and corrosion, which can compromise the performance of equipment and potentially cause hazards. A stable connection is essential for industrial settings where machinery and devices operate under demanding conditions. Without the right cable connections, a power outage could disrupt data transmission or interrupt equipment operations. The waterproof wire splice connector helps to create an efficient and secure connection in these environments.

Wire splice connectors are available in various styles, depending on the specific needs of the project. Some types are easy to use, requiring only a pair of pliers to terminate insulated wires. Others are more complex and require specialized tooling to install. For example, crimp connectors need a crimping tool to fasten the connector’s contact block around the wires, which ensures an electrical and mechanical bond between them. Solder sleeves, on the other hand, combine heat shrink tubing with a solder ring that melts together when heated, creating a durable, water resistant connection.

Some waterproof connectors are also hermetic, meaning they are sealed with an interface seal to protect the junction area where male and female contacts mate. Fischer Connectors offers hermetic waterproof connectors in sizes DEE, DBEE, and DBPE that undergo rigorous product tests to ensure hermetic seals and high levels of environmental and hermetic protection. These products feature an inner contact block that is factory-sealed with high-quality sealing compounds to withstand harsh conditions and protect the product from external influences.